Cylinder Block Assembly
| Cylinder Block Distortion | Maximum | 0.08 Millimeter (mm) | |
| Cylinder Bore Diameter Measure the Cylinder Bore at 50 mm Below the Top Surface | Standard | Grade 1 | 81.640 - 81.650 Millimeter (mm) |
| Grade 2 | 81.651 - 81.660 Millimeter (mm) | ||
| Grade 3 | 81.661 - 81.670 Millimeter (mm) | ||
| Taper | Maximum | 0.006 Millimeter (mm) | |
| Out of Round | Maximum | 0.020 Millimeter (mm) |