Front

1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake pedal.
3. Check the toe settings. Follow the equipment manufacturer's instructions.





4. Loosen the nuts. Remove the clamps.
- Clean and lubricate the nuts and front wheel spindle tie-rod threads.





5. Note: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.

Rotate the front wheel spindle tie-rods.





6. Tighten the nuts. Install the clamps.
7. Recheck the toe settings. Follow the equipment manufacturer's instructions.