Rear Wheel Alignment

Standard value: 7 - 3 mm (0.28 - 0.12 inch)




NOTE: The rear suspension (T) mounting bolt should be turned an equal amount on both sides when adjusting. Loosen the rear-side nut prior to adjusting the eccentric bolt.

- Left wheel: Clockwise direction: toe-in
- Right wheel: Clockwise direction: toe-out

The scale has gradations of approximately 2.4 mm (0.09 inch) (signal side to angle equivalent to 14')




CAUTION: The eccentric bolt should be adjusted within a 90° range left and right from the center position.